CT-9004G

Constant Voltage Range Control

Charging：0.7 V~5V; 

Discharging：0.7 V~5V (Clamp Line Length: 0.5m )；

Minimum Discharge Voltage

0.7 V (Clamp Line Length: 0.5m )；

Accuracy

± 0.02% of FS;

Stability

± 0.005% of FS;

Output Range per Channel

Range 1:  0.1uA---150uA;

Range 2：150uA---5mA;

Range 3：5mA---150mA;

Range 4：150mA---5A;

Accuracy

± 0.02% of FS;

Constant Voltage Cut-off Current

2μA；0.01mA；0.02mA；

Stability

± 0.005% of FS；

Single Channel Maximum Output Power: 25W； 

Stability: ± 0.01% of FS；

Current Response Time (10%FS~90%FS)

≤100μS (10% to 90% or 90% to 10%);

Step Time Range

≥10ms

Data Recording Conditions

Time △t：≥10ms;

Voltage △U：≥1mV;

Current △I：≥100nA;

Data Acquisition Frequency

100Hz; (Continuous Charge & Discharge Mode);

Charging Mode: Constant Current Charging, Constant Voltage Charging, Constant Current/ Constant Voltage Charging, Constant Power Charging, Constant Resistance Charging;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity, Energy, Power;

Discharge Mode: Constant Current Discharge, Constant Power Discharge and Constant Resistance Discharge;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity;

Cycle Test Range: 1~65535 times;

Single Cycle Steps: 254; 

Loop nesting: it has the function of nested loop and supports up to 4 levels of nesting;

Software Protection

Power down Data Protection;

Function of Offline Test;

The safety protection conditions can be set, and the setting specs include: upper voltage limit, lower voltage limit, upper current limit, lower current limit, upper capacity limit, Voltage Fluctuation Protection, Current Fluctuation Protection;